loader

Lensun® 60A MPPT Solar Controller for 12V/24V Lithium & Lead-acid Battery

  • $329.00

  • $579.00

  • Availability:In Stock


Note: We have warehouses in the US, UK, France and Australia, and we will ship to you according to your country to avoid paying import duties.
About wholesale details please contact [email protected]

 

Lensun® High Efficiency 60A MPPT 12V/24V Solar Panel Regulator Charge Controller LCD Display for Lead-acid, Lithium Solar system Battery Charging

 

Why we recommend buy MPPT Solar Controller?

   MPPT circuit solar controllers are considerably more elaborate than PWM. The MPPT technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature.

   The voltage of the solar panel changes with time of day and temperature. The optimum voltage for battery charging changes as the state of charge of the battery. The MPPT charge controller matches these voltages and can result in 30% more efficient transfer of power. This means good MPPT solar charge controllers can reduce the number of solar panels needed by up to 30%- a tremendous benefit.

   Another benefit of MPPT technology is a wide solar input voltage range - this controller can work not only with standard off-grid 12V/24V solar panels, but also with on-grid panels or solar panel arrays up to 150V. The maximum allowed input solar power for this controller is 800W (when charging 12V battery) or 1600W (when charging 24V battery).

   This charge controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection.

  Supporting charging procedures of Gel batteries, Sealed batteries, Open batteries, Lithium batteries and other types of batteries.

Specification:

Model: ML4860
Charging Current: 60A
Discharging Current: 20A
Voltage:12V/24V auto identification
No-load loss: 0.7W to 1.2W
Max. PV Volt: 150V
Max. PV Input Power: 800W (12V) / 1600W (24V)
Max. Load Power: 240W (12V) / 480W (24V)
Max. capacitive load capacity:10000uF
Conversion efficiency:≤ 98%
MPPT tracking efficiency:> 99%
Temperature compensation factory:-3mv/°C/2V (default)
Operating temperature:-35°C to +45°C
Waterproof level:IP32
Weight:3.6kg
Communication method:RS232 RS485
Altitude:≤ 3000m
Product dimensions:285*205*93mm

 

Packing:

 

1 x 60A MPPT solar regulator

 

Write a review

Note: HTML is not translated!
   Bad           Good

Lensun Solar Energy Store © 2024