Note: We have warehouses in the US, UK, France and Australia, and we will ship to you according to your country to avoid paying import duties.
About wholesale details please contact [email protected]

Lensun® Dual Battery 10A 12/24V Solar Panel Regulator Charge Controller + LCD Display Remote MT-1


Designed to charge and protect 2 batteries simultaneously, having automatic cut off to prevent over-charging. Can the unit work with only 1 battery? Yes, absolutely! The controller will determine automatically if there's only 1 battery connected and will pass 100% of charging current to this battery. You can add a second battery later.

  This controller can work with solar panels with combined power up to 160W (12V) / 320W (24V).Protection: over charging, short-circuit, reverse polarity, revert current to PV. It is a perfect solar controller for a caravan, motorhome, camper, boat or another system with 2 independent batteries or battery banks (e.g. engine and leisure battery). You can set initial charging priority e.g. 80% of power to go to the engine battery and 20% to leisure battery. When one of the batteries is fully charged the controller will automatically divert full power to the other battery.



* Microcontroller digital accuracy
* PWM Charge mode
* State of charge (SOC)
* Temperature compensation
* Automatic detection of the voltage
* External temperature sensor
* Remote meter MT-1 shows the working data and condition
* Battery type option
* Battery AH setting
* Charging priority setting
* Modify parameters through four keys
* Electronic protection
* Short circuit protection
* Reverse polarity protection
* Reverse current protection at night
* Over charging or discharging protection
* Over load protection

Technical Specifications

* Set point: Sealed battery | Flooded battery | Gel battery
* Boost voltage: 14.2V | 14.4V | 14.6V
* Equalization voltage: 14.4V | 14.6V | 14.8V
* Float voltage: 13.7V | 13.7V| 13.7V
* Maximum solar voltage: 30V(or 55V)
* Battery voltage range: 1-15V
* Boost time: 30 minutes
* Self-consumption: 4mA at night, 10mA at charging
* Meter bus connection: 8-pin RJ-45
* Temp. compensation: -30mV/12V
* Terminals: 4mm square
* Temperature: -35 Centigrade to +55 Centigrade

MT-1 LCD Display Remote

The unit is ideal for remote system monitoring as it allows you to have full control over the charging process and display various charging parameters such as battery and solar panel voltage, current, battery state of charge and other parameters. It can also record accumulated battery capacity and min / max voltage for each of the 2 batteries.


Rated voltage: 12v,
min voltage (suggest): 8.0V
strong backlight on: < 23mA,
Low backlight on: < 20mA,
Backlight and LED indicator off: < 17mA
Operation temperature: - 40℃ to + 60 ℃
LCD operation temperature: -10 ℃ to + 40 ℃
Communication cable: RJ45 (8PIN), 10 meter
Humidity: 0-100%



1 x 10A Duo Battery Solar Panel Charge Controller Regulator + MT-1 LCD Remote


Write a review

Note: HTML is not translated!
   Bad           Good

Lensun® Dual Battery 10A 12/24V Solar Panel Charge Controller + MT-1 LCD Display Remote

  • Product Code:LS-DB10A+MT-1
  • Availability:In Stock
  • $99.00
  • $69.00