Currency
£ $

Lensun® Dual Battery 10A Solar Panel Charge Controller/Regulator 12/24V Auto Switch

Lensun® Dual Battery 10A Solar Panel Charge Controller/Regulator 12/24V Auto Switch

Lensun® Dual Battery 10A Solar Panel Charge Controller/Regulator 12/24V Auto Switch
Lensun® Dual Battery 10A Solar Panel Charge Controller/Regulator 12/24V Auto Switch Lensun® Dual Battery 10A Solar Panel Charge Controller/Regulator 12/24V Auto Switch Lensun® Dual Battery 10A Solar Panel Charge Controller/Regulator 12/24V Auto Switch Lensun® Dual Battery 10A Solar Panel Charge Controller/Regulator 12/24V Auto Switch Lensun® Dual Battery 10A Solar Panel Charge Controller/Regulator 12/24V Auto Switch Lensun® Dual Battery 10A Solar Panel Charge Controller/Regulator 12/24V Auto Switch
Price: $69.00 $39.00
Qty:  

 Note: We have warehouse in UK, US and Australia. If you are from Europe, we will ship the items to you from our UK stock. If you are from US or Canada, we will ship the items to you from our US stock, as same the Australia, so you can save the import duty. About wholesale details please contact info@lensunsolar.com

 

Designed to charge and protect 2 batteries simultaneously, having automatic cut off to prevent over-charging. Can the unit work with only 1 battery? Yes, absolutely! The controller will determine automatically if there's only 1 battery connected and will pass 100% of charging current to this battery. You can add a second battery later.

  This controller can work with solar panels with combined power up to 160W (12V) / 320W (24V).Protection: over charging, short-circuit, reverse polarity, revert current to PV. It is a perfect solar controller for a caravan, motorhome, camper, boat or another system with 2 independent batteries or battery banks (e.g. engine and leisure battery). You can set initial charging priority e.g. 80% of power to go to the engine battery and 20% to leisure battery. When one of the batteries is fully charged the controller will automatically divert full power to the other battery.

  Other features include various LED indicators, battery type selection (sealed, gel, flooded) and RJ-45 socket for a remote LCD meter (can be purchased separately - click to view our Remote meter / display for dual battery solar controller)

Features

* Microcontroller digital accuracy
* PWM Charge mode
* State of charge (SOC)
* Temperature compensation
* Automatic detection of the voltage
* External temperature sensor
* Remote meter MT-1 shows the working data and condition
* Battery type option
* Battery AH setting
* Charging priority setting
* Modify parameters through four keys
* Electronic protection
* Short circuit protection
* Reverse polarity protection
* Reverse current protection at night
* Over charging or discharging protection
* Over load protection

Technical Specifications

* Set point: Sealed battery | Flooded battery | Gel battery
* Boost voltage: 14.2V | 14.4V | 14.6V
* Equalization voltage: 14.4V | 14.6V | 14.8V
* Float voltage: 13.7V | 13.7V| 13.7V
* Maximum solar voltage: 30V(or 55V)
* Battery voltage range: 1-15V
* Boost time: 30 minutes
* Self-consumption: 4mA at night, 10mA at charging
* Meter bus connection: 8-pin RJ-45
* Temp. compensation: -30mV/12V
* Terminals: 4mm square
* Temperature: -35 Centigrade to +55 Centigrade

Note: All data above all for 12V, if for 24V, please use 2x.
This controller is compatible with MT-1 Remote Meter
http://www.lensunsolar.com/Solar-regulator-controller/Lensun-MT-1-Remote-Meter-LCD-Display-Monitor-for-dual-battery-solar-panel-charge-controller-regulator.

 

Packing:

1 x 10A Duo Battery Solar Panel Charge Controller Regulator

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Your Name:

Phone number

Email (optional)

Question about this product Note: HTML is not translated!

Enter the code in the box below: