Note: We have warehouses in the US, UK, France and Australia, and we will ship to you according to your country to avoid paying import duties.
About wholesale details please contact [email protected]

 

Lensun® Waterproof 30A MPPT 12V/24V Solar Panel Regulator Charge Controller Tracer-7810BP

Work with all Lead Acid Batteries, Sealed AGM GEL, Flooded Battery and Lithium battery(LifePO4), Users can set the battery type by connecting to the cell phone via Bluetooth

This controller promise the tracking efficiency >99% and the charging efficiency is at least 20% higher than the traditional PWM controller, which can make the cost of the whole system much lower! What's more, it's the most compact, warterproof, simple-operated and best price MPPT controller.

 

Why we recommend buy MPPT Solar Controller?

   MPPT circuit solar controllers are considerably more elaborate than PWM. The MPPT technology to track the maximum power voltage point of solar panels as it varies depending on sunlight exposure and temperature.

   The voltage of the solar panel changes with time of day and temperature. The optimum voltage for battery charging changes as the state of charge of the battery. The MPPT charge controller matches these voltages and can result in 30% more efficient transfer of power. This means good MPPT solar charge controllers can reduce the number of solar panels needed by up to 30%- a tremendous benefit.

   Another benefit of MPPT technology is a wide solar input voltage range - this controller can work not only with standard off-grid 12V/24V solar panels, but also with on-grid panels or solar panel arrays up to 100V. The maximum allowed input solar power for this controller is 390W (when charging 12V battery) or 780W (when charging 24V battery).

   This charge controller features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection.

 

Features:
* Externally installed temperature sensor is capable of high-accurate temperature compensation.
* 12V/24V system voltage automatic recognition,
* Strong and durable aluminum case, IP67 waterproof
* Can see Various kinds of status indicationand running status (led indications and faults &alarms)
* Protection againse over-charge,over discharge and overload, protection against electronic shortcircuit and reverse connection.
* TVS lightning protection.
* MPPT charge mode (SOS).

Model No Tracer-7810BP
Battery Type

Lead-acid battery: Sealed(default)/Gel/Flooded

Lithium battery: LifePO4/Li-NiCoMn

Nominal System Voltage 12VDC/24VDC Auto work
Rated Battery Current 30A
Battery input voltage range 8.5~32VDC
Max. Solar Input Voltage 100VDC
Max. PV input power 12V/ 390W 24V /780W
Equalize charging voltage Sealed :14.6V/Gel:No / Flooded:14.8V/User:9-17V (×2/24V) 
Boost Charging Voltage LiFePO4:14.5V/ Li-NiCoMn:12.5V / User:9-17V (×2/24V)
Float Charging Voltage Sealed/Gel/Flooded:13.8V/User:9-17V (×2/24V) 
Low Voltage Reconnect Voltage LiFePO4:12.8V / Li-NiCoMn:10.5V / User:9-17V (×2/24V)
Low Voltage Disconnect Voltage LiFePO4:11.1V / Li-NiCoMn:9.3V / User:9-17V (×2/24V)
Self-consumption ≤13mA/12V;≤11.5mA/24V
Temperature compensation coefficient -3mV/℃/2V
Communication RS485
Working environment Tem. -40℃~+60℃
Enclosure IP67
Overall dimension 153.3×105×52.1mm/6x4x2 inch
Mounting hole size Φ3.5mm
Mounting dimension 120×94mm/4.7x3.7 inch
Net weight 1.26kg/2.77 lbs

 

Note:
1.Please connect to the battery first when you operate the system.
2.Battery must be protected by fuse, otherwise battery willbe damaged.

 

Packing:

1 x 30A Waterproof MPPT solar regulator

 

 

Write a review

Note: HTML is not translated!
    Bad           Good

Lensun® Waterproof 30A MPPT Solar Panel Charge Controller for Lithium battery(LiPO4) and Lead-acid battery Tracer 7810BP

  • Product Code: LS-BP30AM
  • Availability: In Stock
  • $169.00
  • $99.00