Note: We have warehouse in UK, US and Australia. If you are from Europe, we will ship the items to you from our UK stock. If you are from US or Canada, we will ship the items to you from our US stock, as same the Australia, so you can save the import duty. About wholesale details please contact firstname.lastname@example.org
New Remote Meter MT-1 for Duo battery solar charge controller EPIP20COM-DB
MT-1 is an optional accessory for EPIPDB-COM series solar charge controller.
The unit is ideal for remote system monitoring as it allows you to have full control over the charging process and display various charging parameters such as battery and solar panel voltage, current, battery state of charge and other parameters. It can also record accumulated battery capacity and min / max voltage for each of the 2 batteries.
Remote digital display for the 10A Dual Battery Solar Charge Controller or 20A Dual Battery Solar Charge Controller. If you already have one of our dual battery solar controllers, you can easily add this remote meter to your system - just plug in the cable supplied with the meter into the RJ45 socket of the controller.
Ideal for monitoring and display current solar system status. Displays both solar voltage and battery
voltage as well as charging current and load current. Shows Amp-Hour and Watt-Hour charge
accumulation as well as percentage the batteries are charged. Easy to use and program and is
ideal for a quick system check.
Full Digital Display
Displays Voltage, Current, Amp-Hours, Watt-Hours and Percentage Charge
Suitable for both 12V and 24V Systems
Easy to Use and Set-Up
Full Installation Instructions Included
Rated voltage: 12v,
min voltage (suggest): 8.0V
strong backlight on: < 23mA,
Low backlight on: < 20mA,
Backlight and LED indicator off: < 17mA
Operation temperature: - 40℃ to + 60 ℃
LCD operation temperature: -10 ℃ to + 40 ℃
Communication cable: RJ45 (8PIN), 10 meter
1 x Remote Meter MT-1